1. ˵
    չʾ RT_Thread ¼Ĵͺͽ

2. ʹû
    Ӳ̶ӦĿӲƽ̨ 
    壺   N32G4FRH_STB V1.1

3. ʹ˵
    ģ÷:ʱӣI/O 
         1. SystemClock144MHz
         2. GPIOKEY1--PA4, KEY2--PA5, KEY3--PA6
                        ־TX--PA9  RX--PA10ʣ115200

    DemoĲԲ 
         1. سλ
         2. Ӻôڴӡ
         3. ̴̣߳key ̺߳ test ̣߳key ̼߳ⰴ¼test ߳̽¼°KEY1KEY2KEY3¼KEY1KEY2 £¼ AND ŻᱻKEY3 £¼ OR 鿴ӡ־

4. ע
    

1. Function description
    This routine shows the creation, sending, and receiving of events in RT_Thread

2. Use environment
    Hardware environment: development hardware platform corresponding to the project 
    Development board:      N32G4FRH_STB V1.1

3. Instructions for use
    Describe the configuration method of related modules; for example: clock, I/O, etc. 
        1. SystemClock: 144MHz
        2. GPIO: KEY1--PA4, KEY2--PA5, KEY3--PA6
                     Log: TX--PA9 RX--PA10 Baud rate: 115200

    Describe the test steps and phenomena of Demo 
        1. After compiling, download the program to reset and run;
        2. Connect the serial port printing tool;
        3. This example creates two threads, key thread and test thread, key thread detects the key to send event, test thread receives event, press the key (KEY1,KEY2,KEY3) to send event, 
            KEY1,KEY2 press, receive event AND will be triggered, KEY3 press, receive event OR will be triggered. Viewing Print Logs

4. Matters needing attention
    None.